Intel DH67CL DDR3 LGA1155 Desktop Motherboard

At product launch, this desktop board supports:

• Intel® Core™ i7 processor series in an LGA1155 socket
• Intel® Core™ i5 processor series in an LGA1155 socket

• I5-2500K
  I5-2500
  I5-2400S
  I5-2400
  I5-2300
  I7-2600K
  I7-2600

• Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR3 1333/1066 MHz DIMMs
• Support up to 32 GBΨ of system memory

• Intel® H67 Express Chipset

Intel® Rapid Storage Technology (Intel® RST) for RAID 0, 1, 5, and 10

DVI-I and HDMI* connectors for processors with Intel® HD Graphics

Intel® High Definition Audio (Intel® HD Audio)◊ subsystem in the following configuration:

• 10-channel (7.1+ 2 independent multi-streaming) audio subsystem using the Realtek* ALC892 audio codec
• Five analog audio ports and one optical S/PDIF out port
• Internal S/PDIF header and front panel audio header

Gigabit (10/100/1000 Mb/s) LAN subsystem using the Intel® 82579V Gigabit Ethernet Controller

• Two Serial ATA 6.0 Gb/s ports
• Three Serial ATA 3.0 Gb/s ports, with one port compatible with eSATA* extension
• One eSATA 3.0 Gb/s port
• Two USB 3.0 ports
• Fourteen USB 2.0 ports, six back panel ports and eight additional ports via four internal headers

• One PCI Express* 2.0 x 16 discrete graphics card connector
• Two PCI Express 2.0 x 1 connectors
• Three PCI Conventional bus connector

For LAD425KTW:

• LVDS connector

• Three-year warranty
• Standard Warranty Replacement (SWR)

• Two independent memory channels with interleaved mode support
• Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided DIMMs with x16 organization
• 32 GB maximum total system memory (with 4 Gb memory technology)
• Minimum total system memory: 512 MB
• Serial Presence Detect
• DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs

32-bit operating systems are limited to a maximum of 4 GB of memory. These operating systems will report less than 4 GB because of the memory used by add-in graphics cards and other system resources.

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.